Description

Product code: nova7

 

 

Water-based, solvent-free dispersion paint for professional interior painting. Swan-marked, matte wall paint. Wide range of colors. Slight side sheen.

 

 

CHARACTERISTICS:

For the initial and maintenance painting of concrete, plastering, screed, plasterboard, chipboard and wood fiberboard surfaces according to the instructions for use. The product can be used in LEED-, BREEAM- and Joutsen-marked buildings.

 

 

USES:

Wall and ceiling surfaces in dry interiors; e.g. living rooms, kitchens, offices and public spaces for light consumption.

 

 

SATISFACTION:

Theoretical coverage: 8–11 m²/l. The practical adequacy is affected by the painting method and conditions, as well as the shape of the structure to be painted and the quality of the surface.

 

 

THINNER:

Water-based

 

 

WAY OF WORKING:

spraying, brush, roller

 

 

 

STORAGE:

Protect from frost. Store in a dry and cool place, protected from sunlight. Tinted paint or an opened container cannot withstand long-term storage. Close the jar carefully for the next use.

 

 

 

PAINTING CONDITIONS:

The surface to be painted must be dry, the temperature must be at least +10 °C and the relative humidity of the air below 80%.

 

 

 

PRE-TREATMENT OF THE SURFACE:

Unpainted surfaces: Clean the surfaces of dirt and dust. If necessary, level the surfaces with a suitable Presto or Prestonit leveler and sand the dried surface. Remove sanding dust. Primer with Nova 2 or Ykköspohja. Previously painted surfaces: Wash the surfaces with Tikkurila Maalipesu. Sand the paint surfaces to a matte finish and remove the sanding dust. Smooth the cracks and crevices with a suitable Presto or Prestonit leveler and sand the dried surface. Remove sanding dust. Prime unpainted surfaces with Nova 2 or Ykköspohja.

 

 

 

PAINTING: 

1. First round: Mix Nova 7 well before use and dilute with water if necessary. Apply with a roller, spray or brush 1-2 times.
2. Maintenance painting: Surfaces painted with Nova 7 can be serviced with the same or a similar type of water-based paint. See Surface preparation.

 

 

 

MAINTENANCE INSTRUCTIONS: 

If necessary, approx. 1 month after surface treatment at the earliest. Surfaces are cleaned with a dry brush or duster. Dirty surfaces are cleaned with a damp cleaning tool moistened in a neutral (pH 6–8) detergent solution. The surface must not remain wet after cleaning. The dilution instructions given by the detergent manufacturer must be followed when preparing the detergent solution. After the surface treatment, the surfaces must be handled carefully for a few weeks, as the product reaches its final hardness and durability under normal conditions after about 1 month. If the surfaces have to be cleaned soon after surface treatment, the surface is lightly cleaned with a dry or damp cleaning cloth.

 

 

VOC:
(cat A/a) 30g/l(2010), Nova 7 contains VOC max. 10 g/l.

 

 

Nova 7 can be tinted widely to thousands of shades, available e.g. all shades of the Symphony color chart.