Kuvaus

Floor Polish

Special features

• Easy to spread
• Does not make the floor slippery
• Semigloss
• An excellent durability
• Easy to maintain
• A high chemical and hand sanitizer resistance

Application

Floor polish for polishing and re-coating all floor surfaces that can be polished. Can also be used as a so-called primer floor polish.

Instructions for use

Apply polish on a clean and dry floor. Dose directly on the floor or to the equipment used in the application and spread evenly. Apply 1–2 coats depending on how worn out the floor is and the level of future use. Let dry at least 30 minutes between each coating.

Re-coating is done on Kiilto Silk polish. Clean the floor surface with Kiilto Pinta or Kiilto 10 Universum and apply a single coat on dry surface.

In maintenance cleaning, clean manually or mechanically with Kiilto Vieno or Kiilto 10 Universum. In addition to all-purpose cleaners, it is recommended to use maintenance cleaners, such as Kiilto Illusia 10 or Kiilto Pollycare.

Consumption 80–120 m² / l, depending on how worn out the floor is and how the product is spread. The polish usually dries approx. in 30 minutes. Recommended working conditions: temperature 18–24 °C, relative humidity 40–70 %.

Note

Mix the product carefully before use. The product freezes.

Storage

Store in a warm place.

pH

Product pH 8.5

Appearance and scent

White, unscented liquid.

User and environmental safety

Avoid unnecessary contact with the skin. In continuous use, protective gloves are recommended. In case of
contact with eyes, rinse immediately with plenty of water, and seek medical advice if needed.

Country of manufacture

FINLAND

THE MINIMUM ORDER IS 5 CANISTERS