Kuvaus
Impregnation Liquid
Special features
- The M1 rating
- Easy to apply
- Forms an invisible and effective protective layer
- Does not leave a film
- Does not make the surface slippery
- Dries quickly
Application
Impregnating agents for protecting stone and tile floors and their joints.
Instructions for use
Apply Kiilto Kisu as a thin even layer on dry and clean floor. Apply with a clean mop or polish applicator. Usually, apply one layer of Kiilto Kisu, on porous surfaces 2–3 layers. Let it dry for a minimum of 30 minutes between applications. The color of the surfaces may deepen in connection with the treatment. A surface treated with Kiilto Kisu cannot be painted, lacquered or waxed.
Drying time approx. 60 minutes under normal conditions. Minimum working temperature +15°C. Covers 30–70 m²/l, depending on the porosity of the surface.
Surface patch-up: clean the floor with Kiilto Teho A 100 and apply one layer of Kiilto Kisu on fully dried surface where worn.
Maintenance cleaning: normal manual or mechanical methods using e.g. Kiilto 10 Universum or Kiilto Teho A 100 as the cleaner.
Appearance and scent
Transparent liquid
Compositions
| Ingredient | Effect |
|---|---|
| Sodium Benzoate | Preservative |
| Preservative |
pH
Product pH 5
Storage
Warm storage.
User and environmental safety
Avoid unnecessary skin contact. Safety gloves are recommended in continuous use. In case of eye
contact, rinse with copious water, and then contact a doctor, if necessary.
