Acoustic panel 18 × 300 × 300 mm Crossus black

The 30 × 30 cm acoustic panel combines modern design with practical sound absorption. Black diagonal slats and a black felt backing create a stylish contrast, and thanks to its compact size, the panel is suitable both as an individual accent and as part of a larger arrangement.

Complete your interior with a striking and practical solution using this compact acoustic panel. Black diagonally arranged MDF slats and a black felt backing create a clean and modern contrast that works equally well in Scandinavian interiors and industrial-style spaces.

The square size of the panel, 30 × 30 cm, makes it versatile: used individually, it works as an accent element on a wall near a workstation, in a living room, or in a hallway. With several panels, you can create larger surfaces, creative patterns, or highlighted wall areas. Thanks to their small size, the panels are also easy to fit into narrow and difficult-to-decorate spaces.
The black felt backing acts as an effective sound absorber, reducing echo and improving room acoustics. The MDF slats add durability and a high-quality finish. The panels can be quickly attached with glue or screws and can be cut to size without special tools.

Features and benefits:

• Compact size: 30 × 30 cm – easy to fit even into small spaces.
• Diagonally arranged black MDF slats create a dynamic look.
• Black felt backing reduces echo and improves room acoustics.
• Can be combined into larger arrangements or used as a single accent.
• Easy to install with glue or screws.
• Suitable for both homes and public spaces.

Technical information:

Acoustic wall panels installation

Acoustic panels can be installed directly onto the wall or over a framework. When installed over a framework, the panels achieve sound absorption class A.

Installation can be done using screws or adhesive.

• When using screws, attach the panel with three screws horizontally, spaced 60 cm apart.
• When using adhesive, apply it evenly across the back of the panel.
• When installing over a framework, attach with three black screws horizontally, with the framework and screwing spaced 60 cm apart.

1. Prepare the necessary tools and materials for installation.
   You will need adhesive, a fine-toothed circular saw (or handsaw), a utility knife, a measuring tape, and screws. Check each panel for any defects before installation. By installing the panels, you accept the product quality.
2. Measure the height and width of the wall. Calculate the horizontal spacing of the panels so that there is an equal amount of space on both edges. The splitting of corner panels should align between the slats, allowing the split to be made along the felt using a utility knife.
3. Cut the panels to the correct length with a circular saw and start the installation. Always ensure the panels are straight using a level or similar tool.
4. When using adhesive, apply it evenly across the back of the panel and place the panel in position. You can also use screws to assist with installation if desired.
   When using screws, position the panel and screw it in place as described above.
5. When installing the next panel, always check that the spacing between the slats remains consistent and that the panels are aligned correctly.

Horizontal or ceiling installation

The installation follows the same principles as vertical installation. When installing horizontally, the direction is always from bottom to top. When installing on the ceiling, it is recommended to use both screws and adhesive.

NOTE: If you have ceiling heating, ensure the product is compatible with the heating system by consulting the heating system provider.

PLATFORM CHARGES AND SMALL DELIVERY SURCHARGE:

EUR PALLET 15 €, FIN PALLET 18.6 €, SINGLE-USE PALLET 9 €, Small delivery supplement (<100 € for purchases) 13.2 €