Bauteq moisture barrier 10 L

0.0

Cost-effective solution for protecting wet rooms against water vapor penetration.
The first moisture barrier on the market with a defined water vapor transmission rate, WDD = 40 g/m²/24h.
The first coat is diluted with water 1:2, the second coat is applied undiluted.
Active substance: styrene-butadiene latex.

€23.40€27.00

not inc. VAT.

Amount

How to order?

Step 1 Select a product.

Step 2 Add to quote.

Step 3 Fill the form.

Step 4 Send a request.

Step 5 Answer within 24 hours.

Protection of building structures against moisture penetration from the inside.
BAUTEQ Moisture Barrier is designed for use in damp and wet rooms to protect walls and ceilings against moisture before the installation of ceramic tiles or other finishing materials. It is the first professional moisture barrier with a fixed water vapor permeability. Suitable substrates include plasterboard, concrete, plaster, or brickwork. It is also suitable for overpainting. The moisture barrier is not intended for blocking ground moisture, for underwater surfaces in wet rooms, or as an additive to cement mixtures.

Application conditions

Ambient air and substrate temperature must be at least +10 °C, with relative humidity up to 80%.
Apply with a paint roller, sprayer, or brush.

Instructions for use

The substrate must be clean, dry, and free of dust.
The product is applied in two coats
First coat: dilute the moisture barrier with water in a 1:1 ratio.
After approx. 30 minutes, or once the surface is dry, apply the second coat undiluted.
Ceramic tiles can be installed about 4 hours later, once the BAUTEQ Moisture Barrier layer has dried.

Consumption:

For non-absorbent surfaces (two coats): 0.15 l/m²
For absorbent surfaces (two coats): 0.3 l/m²

Cleaning

Wash tools and clothing immediately with water. Dried material can be removed mechanically.

Technical data	Unit	Value
Final drying time	hours	4
Density	g/cm³	1.03
pH	–	7–8
Water vapor transmission (WDD)	g/m²/24h	40
Reference (wall and ceiling paint)	g/m²/24h	600
Color	–	Blue

*The given parameters are measured at 23 °C and 50% relative humidity.

Storage

Guaranteed shelf life: 24 months from the date of manufacture, stored in a dry place in tightly closed original packaging at +5 °C to +30 °C. The product is frost-sensitive!

Safety requirements

Avoid contact with skin and eyes. Wear suitable protective gloves and eye/face protection. Avoid skin contact. More detailed safety information is available in the product Safety Data Sheet (SDS).

Check out other products in “Constructon Chemistry”