Acoustic felt panel 9 × 300 × 300 mm Gravus light grey, 4 pcs

The Gravus acoustic felt panel, sized 30 × 30 cm, is a simple and timeless solution for sound absorption. The 9 mm thick light felt effectively reduces echo and blends stylishly into any interior. Easy installation: ready-made adhesive surface — remove the protective film and attach the panel to the wall.

The Gravus acoustic felt panel brings a clean and timeless solution for improving room acoustics. Its light, natural shade and smooth surface make the panel easy to combine with different interior styles, from Scandinavian and minimalist to modern and classic.

The compact 30 × 30 cm size makes Gravus versatile: used individually, it works as a subtle yet stylish element on a workstation or hallway wall, while several panels can be combined to create larger acoustic surfaces.
Made from 9 mm thick acoustic felt, Gravus effectively reduces echo and improves the clarity of the sound environment. The acoustic panel comes with a ready-made adhesive surface, making installation effortless. Simply remove the protective film and press the panel onto the desired spot on the wall. No separate adhesives or fasteners are needed. If necessary, the panel can be cut to size without special tools.

Features and benefits:

• Dimensions: 9 × 300 × 300 mm per panel.
• Simple, smooth-surface, timeless design.
• Material: acoustic felt with a finished surface in a light grey shade.
• Easy installation: ready-made adhesive surface — remove the protective film and attach to the wall.
• Suitable for both homes and public spaces.
• Improves sound quality by reducing echo and noise.
• Allows the creation of individual patterns and surfaces.

Acoustic wall panels installation

Acoustic panels can be installed directly onto the wall or over a framework. When installed over a framework, the panels achieve sound absorption class A.

Installation can be done using screws or adhesive.

• When using screws, attach the panel with three screws horizontally, spaced 60 cm apart.
• When using adhesive, apply it evenly across the back of the panel.
• When installing over a framework, attach with three black screws horizontally, with the framework and screwing spaced 60 cm apart.

1. Prepare the necessary tools and materials for installation.
   You will need adhesive, a fine-toothed circular saw (or handsaw), a utility knife, a measuring tape, and screws. Check each panel for any defects before installation. By installing the panels, you accept the product quality.
2. Measure the height and width of the wall. Calculate the horizontal spacing of the panels so that there is an equal amount of space on both edges. The splitting of corner panels should align between the slats, allowing the split to be made along the felt using a utility knife.
3. Cut the panels to the correct length with a circular saw and start the installation. Always ensure the panels are straight using a level or similar tool.
4. When using adhesive, apply it evenly across the back of the panel and place the panel in position. You can also use screws to assist with installation if desired.
   When using screws, position the panel and screw it in place as described above.
5. When installing the next panel, always check that the spacing between the slats remains consistent and that the panels are aligned correctly.

Horizontal or ceiling installation

The installation follows the same principles as vertical installation. When installing horizontally, the direction is always from bottom to top. When installing on the ceiling, it is recommended to use both screws and adhesive.

NOTE: If you have ceiling heating, ensure the product is compatible with the heating system by consulting the heating system provider.

PLATFORM CHARGES AND SMALL DELIVERY SURCHARGE:

EUR PALLET 15 €, FIN PALLET 18.6 €, SINGLE-USE PALLET 9 €, Small delivery supplement (<100 € for purchases) 13.2 €