Kontio Solar solar panel, 410W, full black, 32 pcs

Product code: KS007

MBB (Multi-Bus-Bar)

MBB technology equips the solar cell with 12 or 16 busbars instead of the traditional 4, 5, or 6. This design provides higher power output and improved reliability. The use of thin, rounded copper wires eliminates the need for ribbons across the solar cell. The rounded cross-section enhances optical performance by reflecting more light into the solar cell.

PERC (Passivated Emitter and Rear Contact)

PERC technology features a passivated rear layer, which prevents radiation from escaping through the back of the cell, thereby improving efficiency and overall power generation.

Half-Cut Technology

Half-cut technology increases panel production by reducing the size of the cells, allowing twice as many smaller cells to fit into the panel. These smaller cells are more durable, leading to a longer lifespan for half-cut solar panels. Kontio Solar’s monocrystalline cell is laser-cut into two halves, creating two parallel solar cells that operate independently.
For example, if a shadow (such as from a tree) covers part of the solar cell, the upper cell continues generating power at full capacity.

Advantages of smaller cells include:

• Lower internal resistance
• Reduced power loss
• Lower operating temperature
• Increased electricity production
• Anti-PID (Potential-Induced Degradation) Technology
• Kontio Solar’s Anti-PID technology significantly reduces the PID effect by using high-quality quartz glass that naturally contains sodium. PID (Potential-Induced Degradation) in solar panels occurs due to significant potential differences between the semiconductor material (the cell) and other module components (such as glass, brackets, or aluminum frame). Kontio Solar’s grounding technique further helps mitigate PID degradation.

Technical information:

• Mechanical Load Capacity (Wind, rear side): 2,400 Pa
• Snow Load Capacity: 5,400 Pa
• Frame: Anodized aluminum
• Frame Color: Black
• Cells: 108 cells, 182 mm (2×54)
• Efficiency: 21.0%
• Irradiance: 1000 W/m²
• Cell Temperature: 25 °C
• Air Mass: 1.5
• Power Output: 410 W
• Dimensions: 1,722 x 1,134 x 30 mm
• Weight: 20.5 kg
• Glass: AR (Anti-reflective) coated, tempered, thickness 3.2 mm
• Connector: MC4, IP68 rated
• Cable Length: 1,200 mm (+ and -), conductor cross-section: 4 mm²
• Open-Circuit Voltage (Voc): 37.32 V
• Short-Circuit Current (Isc): 13.95 A
• Voltage at Maximum Power (Vmp): 31.45 V
• Current at Maximum Power (Imp): 13.04 A
• Maximum System Voltage: 1,500 V
• Maximum Fuse Rating: 25 A
• Operating Temperature Range: -40 °C to +85 °C
• Testing Standards: IEC EN 61730-1:2018/AC:2018–06; IEC EN 61730-2:2018/AC:2018–06

Kontio Solar standards

Drawings