Primer for Concrete Floor
- The M1 rating
- Fills the pores of the surface
- Does not result in a visible film on the surface
- Prevents stains from absorbing into the material
- The treatment cannot be removed with ordinary wax removal methods
Basic treatment agent for porous surface materials, such as mosaic concrete and unglazed stone material. Can also be used for impregnating old and very porous linoleum floors. Not suitable for dry-pressed tiles.
Instructions for use
The surface to be treated must be porous, clean and dry. If the surface is too non-porous or dirty, Kiilto Kisu BT will not absorb and comes off after drying. Absorption can also be prevented by an oil-based stone treatment agent previously applied to the floor. Please note that very porous floorings require a long (up to 24 hours) drying time after cleaning.
Turn underfloor heating off well in advance of application. Apply one layer of Kiilto Kisu BT and let it absorb. Wipe unabsorbed substance off. Do not use excessive amounts of the product, it must absorb completely into the surface material. If necessary, apply a second layer. If Kisu BT forms a visible layer on the surface, it can be removed immediately after drying by washing it with e.g. Kiilto Lionel, dosage 1 dl/1 l water, or simply let to wear off.
Once dry, a floor treated with Kiilto Kisu BT can be waxed with e.g. Kiilto waxes.
Drying time 1–24 hours. Covers 25–50 m²/1 l.
The product can freeze.
Product pH 8
Appearance and scent
Country of manufacture
THE MINIMUM ORDER IS 3 CANISTERS