Acryl Super Floor Wax
Forms a wear-resistant, long-lasting polymeric film on the surface (floor) to be treated, which protects
surfaces from mechanical and chemical effects
The protective film produced by the product is not slippery, is colorless and makes it easy to maintain the surfaces. (At a dilution of 1:10 makes the polished concrete floor dust-free)
After a short drying time, it makes surfaces shiny without polishing
The product is environmentally friendly and does not generate toxic fumes when dried
The product has a pleasant smell and does not irritate the skin
At a dilution of 1:10, it makes the polished concrete floor dust-free
suitable for linoleum and rubber surfaces
PVC and plastic coatings
suitable for artificial and natural stone and concrete floors
suitable for wood and parquet coated surfaces
– We recommend applying the product with a mop (do not separate textile particles) in a thin layer
previously cleaned and dried from greasy, old wax. Do not rub.
– In the case of a porous surface, it is advisable to pre-coat the floor with a 1: 3 aqueous solution and allow to dry.
Immediately cover the normal floor with a 1: 1 aqueous solution of the substance and allow to dry.
– In order to obtain a particularly durable covering, the floor may be covered again in some places or
completely undiluted and allow to dry. For full drying for at least 12 hours.
– Use the product as an aqueous solution for further maintenance and gloss retention (as needed)
1:50; for stone surfaces up to 1: 100; for parquet surfaces 1: 200 and more.
NB! Before starting work, clean the floor from grease and another type of wax
Density: approx. 1.03 g / ml
Ph-value (concentrate): ca. 8.0 – 9.0
Boiling point: ca 100o
Dry matter content: approx. 21%
3 x 5 litres